OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seite 25
MOBILES KANTENANLEIMGERÄT / EDGE BANDING MACHINE KAM 50M
13.3.2
Passing through of band
Loose knobs
E
and separate the 2 bodies so as to allow the strip to pass
Pass the band under the non-return rod
F
and through knives
U
until it is under gluing
roller
W
Close th moving body
G
by means of knob
H
to the width of the band without clamping it
so that it is guided and secure it in this position with knobs
E
14
OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating
the device.
14.1
Operation instructions
W A R N I N G
Perform all machine settings with the machine being
disconnected from the power supply!
! ! ! ! A T T E N T I O N ! ! ! !
TO PREVENT THE DEVICE FROM DAMAGE, TURN IT DOWN
TO MINIMUM TEMPERATURE AND LET IT COOL DOWN
PLUGGED IN FOR 5 MINUTES.
Summary of Contents for KAM 50M
Page 35: ......
