TECHNIC
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seite 20
MOBILES KANTENANLEIMGERÄT / EDGE BANDING MACHINE KAM 50M
11
TECHNIC
11.1
Technical Details
Power
W
2000 (100%)
Temperature range
°C
50 - 610
Banding temperature range
°C
330 - 540
Voltage
V
220
Max. banding width at 1mm edge thickness
mm
50
Max. banding width at 2mm edge thickness
mm
30
Weight
kg
3
Vibration
m/s²
2,5
Sound pressure
dB (A)
65,6
12
SAFETY
12.1
Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the
assembly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
For banding of hot melt adhesive-coated edges of veneer, plastic and similar materials on straight
and round workpieces.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-
Machines and its sales partners cannot be made liable for ANY direct or indirect
damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
12.2
Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit
the use of this machine!
Summary of Contents for KAM 50M
Page 35: ......
