HOLZMANN MASCHINEN KAM 50M, User Manual

Page: 22 / 35

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 22
MOBILES KANTENANLEIMGERÄT / EDGE BANDING MACHINE KAM 50M
12.3 Prohibited use
 The operation of the machine outside the stated technical limits described in this manual is
forbidden.
 Operation of the machine function without emergency stop button or impeller box with
open doors is prohibited.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being
certified is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is
forbidden.
 The unattended operation on the machine during the working process is forbidden!
 It is not allowed to leave the immediate work area during the work is being performed.
For a different or additional use and resulting property damage or injury takes
HOLZMANN-MASCHINEN no responsibility or warranty.
12.4 Remaining risk factors
W A R N I N G
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest
attention is required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
Despite of correct and proper use and maintenance there remain some residual risk factors:
 Risk of burns to the hands / fingers through the heating of machine components away
from the insulated handle or by contact with hot melt adhesive.
 Risk of burns from hot vapours.
 Risk of injury to the eye by flying parts, even with goggles.
 Health hazard due to inhalation of hot melt adhesive vapours.
 FIRE HAZARD! Handle carefully before, during and after the operation allow further cool
down the machine before storing it.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.