Hologic ThinPrep Operator'S Manual Download Page 192

Page: 192 / 230

ROUBLESHOOTING

Imager Duo Operator’s Manual

6.11

IMAGING STATION AND IPC ERRORS

Table 6.2: Imaging Station and IPC Errors

Error #

Error Text

Corrective Action

2407

Slide has been rejected.

•

See Section C, Slide Preparation

and Quality.

•

If more than one Imaging Station

is in the lab, insure that the veri-
fication slides are not switched
among Imaging Stations.

2409

Three consecutive 2407 errors
within a cassette generate a
2409.

3106

Slide not found.

•

Ensure that the slide was prop-

erly loaded in the cassette – with
label facing outward and only
one slide per slot.

•

If slide was loaded correctly, see

Section C, Slide Preparation and
Quality.

3107

Three consecutive 3106 errors
within a cassette generate a
3107.

3111

Slot has multiple slides.

3113

Slot below has slide out of posi-
tion or multiple slides.

3159

Map Cassette Timeout.

• Clean cassette mapping sensor,

refer to page 5.7.

• Power Cycle the Imaging Sys-

tem. NOTE that the IS and IPC
should always be power cycled
together. See page 3.29, Shut-
ting Down the System.

3303

OCR Read Failed.

•

See Section C, Slide Preparation

and Quality.

•

If label was printed on a T3,

replace ribbon.

3304

3305

Invalid Slide ID.

•

See Section C, Slide Preparation

and Quality.

•

Call Tech Support to verify the

Slide ID has the proper CRC.

3306

SECTION

Summary of Contents for ThinPrep







































































































































































































































Search results

Summary of Contents for ThinPrep

Reviews:

Related manuals for ThinPrep

Brands by name

Popular brands

Hologic ThinPrep, Operator'S Manual

Search results

Summary of Contents for ThinPrep

Reviews:

Related manuals for ThinPrep

Brands by name

Popular brands