Hologic ThinPrep Operator'S Manual Download Page 154

Page: 154 / 230

PERATION

THE

OFTWARE

ENU

Imager Duo Operator’s Manual

4.55

Figure 4-70 Rate Report

To print the report, click on the

Print

button. Click on the

Save to USB

button to

save the report to a USB key, or the report may be saved to the NAS drive (if
your system is configured with H

net

). To close the report, click on the

Close

button to return to the Workload display.

Report - Run Report

The Run Report displays the results of a processed batch. Information from the
100 most recent batches is available. This is the same report that is accessed
from the main menu under Reports. Refer to “REPORTS MENU” on page 4.2.

Summary of Contents for ThinPrep







































































































































































































































Search results

Summary of Contents for ThinPrep

Reviews:

Related manuals for ThinPrep

Brands by name

Popular brands

Hologic ThinPrep, Operator'S Manual

Search results

Summary of Contents for ThinPrep

Reviews:

Related manuals for ThinPrep

Brands by name

Popular brands