![Hologic ATEC SAPPHIRE Operator'S Manual Download Page 21](http://html1.mh-extra.com/html/hologic/atec-sapphire/atec-sapphire_operators-manual_2146514021.webp)
21
Item
Instructions
Power Cord
Removal (with the console powered off)
1. Unplug console power cord from wall outlet.
2. Completely unwrap and remove power cord from cord management plate.
3. With #1 Philips screwdriver, loosen fastener located on bottom of retaining
bracket.
4. Disconnect power cord connector from power receptacle.
Installation (with the console powered off)
1. Press the new power cord into the cord receptacle.
2. With #1 Philips screwdriver, tighten fastener located on bottom of retaining
bracket.
Verification of Installation
1. Plug power cord into wall outlet.
2. Turn console power on.
3. Verify console powers on, beeps and defaults to the biopsy mode.
4. Turn console power off.
5. Unplug power cord from wall outlet and wrap clockwise around cord management
plate.
Power Cord Connector
Cord Management
Plate
Power Cord
Power Cord
Connector