12
ATEC Footswitch Connection
The ATEC footswitch is provided by Hologic and should be attached to the right side of the console upon delivery. Verify
footswitch connections prior to use per the Field Replaceable Items Section of this manual.
ATEC Vacuum Line Assembly
The system will generate vacuum when the proper modes are selected.
The vacuum connections require that you use a Hologic ATEC canister. (Refer to Figure 2)
1. Assemble the suction canister, as shown in
Figure 2,
and place the canister in the canister holder on the console.
2. Ensure that the lid and large port cap are secure and sealed to avoid vacuum leaks.
3. Plug the vacuum line assembly on the console into the top port labeled “VACUUM” on the suction canister lid.
FIGURE 2: ATEC CANISTER
NOTE:
The ATEC Canister is a single use product with a recommended maximum volume of 400cc.
D
C
B
A
A
B
C
D
8
7
6
5
4
3
2
1
REV:
SHEET: 1 OF 1
DWG. NO:
SIZE:
SCALE: 1:1
TITLE:
Sapphire Fig 2 Canister
B
ENG-0034-T50, Rev. 003
1
2
3
4
8
7
6
5
001
CAD FILENAME: Canister&Lid
VERSION: 00-0000
MUST BE ROHS COMPLIANT. ROHS COMPLIANCE STATEMENT
MUST BE INCLUDED ON ALL CERTIFICATES OF CONFORMITY
Close off “Patient” Port with cap
when procedure is completed and
prior to disposal
“Vacuum” Port for Vacuum Line
Assembly from Atec console
Large opening
Close off large opening with cap
“Patient” Port for blue suction
connection from Handpiece
For applicable product revisions,
close off “Vacuum” Port with cap
when procedure is complete and
prior to disposal
