EN
46
916.001.650_002
GCT 51** (ST) (STA) EVO 3
•
Close the blades.
6.5.1
Cutting with CT 5160
To enable better cutting in specific situations the spreading tips can be removed.
Push (A) and pull (B) the pin out untill it locks.
•
Remove the spreading tips from the blades (C).
6.6
Squeezing
•
Open the blades of the tool.
•
Place the blade tips over the object to be squeezed.
•
Position the load 25 mm from the end of the tips. Use full width of the tips.
•
Close the blades of the tool.
6.7
Spreading
6.7.1
Initial opening is sufficient
•
Close the blades completely.
•
Place both blade tips between the parts to be spread.
•
Position the load 25 mm from the end of the tips. Use full width of the tips.
•
Force the parts apart by opening the blades.
6.7.2
Initial opening is insufficient
•
Open the blades.
•
Place one blade tip in the opening. Use full width of the tip.
•
Close the blades until the material is clamped.
•
Bend the clamped material out of the way.
•
Repeat this procedure until there is sufficient space to place both blade tips.
•
Force the parts apart by opening the blades.
WARNING
Stop immediately if the blades are out of line. Danger of serious injury and of serious damage
to the equipment.
WARNING
Prevent operation of the tool when you remove or connect of accessoiries.
Avoid cutting with the blade tips only. (Fig. 12)
CAUTION
When using tool model (G)CT 5160, always use the spreading tips. Make sure the lock pins
stay locked.
CAUTION
When using tool model (G)CT 5160, always use the spreading tips. Make sure the lock pins
stay locked.
Summary of Contents for GCT 51 EVO 3 Series
