B U L L E T I N
G L V - 4 0 S 1 # 1 1 9 6 G E A R L E S S T R A C T I O N M A C H I N E
Page 7-6
Rev. A - 04/01/2022
3. Install the encoder. Use the bolt M5 to secure the encoder to the encoder cover by hex
wrench (4mm). Use 4mm socket Allen and torque wrench to tighten the bolt to 44 in-lbs.
See Figure 27.
4. Rotate the encoder, it should be very flexible at this time, tighten the encoder locking
screw according to 11 in-lbs. by a hex wrench so the encoder outer cannot rotate by
hand. See Figure 28.
5. Install the encoder cable on the encoder. Take care to orient the plug and socket
correctly. See Figure 29.
Figure 27
Figure 28
Figure 29
