Repeater Type 11-B :
The repeater is standard flush mounted.
The repeater is not sensible for magnetic disturbances,
therefore it can be mounted on every location and in every
position but the distance between the repeater and the
magnetic compass may not be less than 1.5 mtr.
The repeater is water resistant, NOT waterproof, therefore it
may not be mounted outside. Precautions against humidity
and salty environment have been taken.
Repeater dimensions :
Electronic unit Type IN 11-B :
The electronic unit type IN11-B is the main part of the
compass system. All signals, compass adjustments of
deviations and sensitivity of the system are processed in this
unit.
Therefore this unit must be mounted at an easy
accessable place for compass adjustment and service !!!
To access the electronic unit, open its front panel.
TAKE ESD PRECAUTIONS BEFORE YOU START
SERVICING OR ADJUSTING !!!
4 special holes for mounting the unit are in the bottom of the
housing, which are near the corners of the housing next to the
mounting holes of the front panel. No special bracket is
needed.
8
xfiles\\tek\in11\doc\handleiding_in11b_eng.lwpp
status: definite date: 30-9-2002
DIN 192
DIN144
Hight
192 mm
144 mm
Wide
192 mm
144 mm
Depth
72 mm
72 mm
Compass card
150 mm
108 mm
