Holiday 2002 NEPTUNE, Owner'S Manual

Page: 192 / 344

Water Systems
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2 0 0 2 N E P T U N E
6 • 192
A flexible three inch sewer hose attaches between
the termination drain and the shore facility. Sewer
hoses usually come in 10 or 20 foot lengths. The
shore fitting for the sewer hose may be three or four
inch pipe, which could be male or female thread.
Another possibility may be a four inch pipe, with no
threads, covered by a metal plate. There are many
configurations. Different style adapters are available
to fit most configurations. Hose ladders may also be
purchased to support the hose.
It is important that the hose remains secure.
Always tighten clamps and restraining devices
before use. Lay the hose inline between the termina-
tion outlet and the shore fitting. Restrain the hose to
prevent movement during use. Wear protective
and/or disposable gloves when handling the sewer
hose.
To Attach the Hose:
1. Remove termination cap. Align coupler
tangs with termination tabs. Twist coupler
clockwise 90º locking coupler to termina-
tion outlet.
2. Attach the other end of the hose to the
drain service. Restrain hose to prevent
movement during use.
3. Open the (small) grey water valve.
The (large) black water valve remains closed until the tank is full or until
time of departure. This will help prevent accumulation of solids. Use the out-
side faucet or shower attachment for washing or rinsing.
NOTE: Lubricate the O-ring on the sewer hose adapter
periodically with silicone spray. Use care when connecting
the sewer hose adapter to the termination outlet in cold
weather.
Waste Drain Hose
OM040422
OM130013