Black plate (27,1)
Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -
CRC - 11/8/13
Vehicle Care
10-27
2. Reverse Lamp
Reverse/Rear Fog Lamp Assembly
- Back Side View
1. Remove the three inboard
screws from the aero panel
located under the rear fascia.
2. Push up on the aero panel to
locate the rear fog lamp bulb
socket (2).
3. Turn the bulb socket (2)
anticlockwise to remove it from
the bulb assembly.
4. Pull the bulb from the bulb
socket.
5. Push a new bulb straight into the
bulb socket.
6. Reinstall the bulb socket by
lining up the tabs and turn it
clockwise to lock it into place.
7. Replace the three inboard
screws into the aero panel.
Reverse Lamps
To replace a bulb:
1. Remove the three inboard
screws from the aero panel
located under the rear fascia.
2. Push up on the aero panel to
locate the reverse lamp bulb
socket (1).
3. Turn the bulb socket (1)
anticlockwise to remove it from
the bulb assembly.
4. Pull the bulb from the bulb
socket.
5. Push a new bulb straight into the
bulb socket.
6. Reinstall the bulb socket by
lining up the tabs and turn it
clockwise to lock it into place.
7. Replace the three inboard
screws into the aero panel.
Number Plate Lamp
To replace one of these bulbs:
1. Press the spring clip on the right
end of the lamp assembly to the
left to unlock the lamp assembly.
2. Pull down on the lamp assembly
to remove it from the fascia.