HOLDEN Volt 2014 Owner'S Handbook Manual Download | Manualshive

Page: 286 / 377

background image

Black plate (10,1)

Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -

CRC - 11/8/13

10-10

Vehicle Care

Selecting the Right Engine Oil

Selecting the right engine oil
depends on both the proper oil
specification and viscosity grade.
See

Recommended Fluids and

Lubricants on page 11-2

.

Specification

Use and ask for licensed engine oils
with the dexos1

®

approved

certification mark. Engine oils
meeting the requirements for the
vehicle should have the dexos1
approved certification mark. This
certification mark indicates that the
oil has been approved to the dexos1
specification.

{

Caution

Failure to use the recommended
engine oil or equivalent can result
in engine damage not covered by
the New Vehicle Voluntary
Warranty. Check with your dealer
or service provider on whether the
oil is approved to the dexos1
specification.

Viscosity Grade

SAE 5W-30 is the best viscosity
grade for the vehicle. Do not use
other viscosity grade oils such as
SAE 10W-30, 10W-40, or 20W-50.

Cold Temperature Operation: In an
area of extreme cold, where the
temperature falls below

−

29°C

(

−

20°F), an SAE 0W-30 oil may be

used. An oil of this viscosity grade
will provide easier cold starting for
the engine at extremely low
temperatures. When selecting an oil
of the appropriate viscosity grade,
always select an oil of the correct

specification. See

“

Specification

”

earlier in this section for more
information.

Engine Oil Additives/Engine
Oil Flushes

Do not add anything to the oil. The
recommended oils with the dexos
specification and displaying the
dexos certification mark are all that
is needed for good performance and
engine protection.

Engine oil system flushes are not
recommended and could cause
engine damage not covered by the
New Vehicle Voluntary Warranty.

What to Do with Used Oil

Used engine oil contains certain
elements that can be unhealthy for
your skin and could even cause
cancer. Do not let used oil stay on
your skin for very long. Clean your
skin and nails with soap and water,
or a good hand cleaner. Wash or
properly dispose of clothing or rags

«
...
284
285
286
287
288
...
»

Summary of Contents for Volt 2014


























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2014

Brand: Calira Pages: 14

Brand: GOgroove Pages: 9

Brand: Romik Pages: 6

Brand: Yakima Pages: 13

Brand: Menabo Pages: 11

DAF CHARGEMAX 90

Brand: Paccar Pages: 40

RVS systems RVS-M641

Brand: Safe Fleet Pages: 24

Brand: SSV Works Pages: 2

Brand: Blue Ox Pages: 5

Sprinter Bed System DIY

Brand: FVC Pages: 8

ASENTO EV-COLC15R

Brand: ADAPT SOLUTIONS Pages: 22

Brand: TracRac Pages: 6

Brand: AA Products Pages: 8

Brand: Maxon Pages: 10

Brand: Webasto Pages: 28

Brand: Metra Electronics Pages: 16

Brand: Fiat Pages: 220

530 GRAN TURISMO - 2010

Brand: BMW Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands