HOLDEN Volt 2014 Owner'S Handbook Manual Download Page 118

Page: 118 / 377

Black plate (32,1)

Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -

CRC - 11/8/13

5-32

Instruments and Controls

The finish times must be
consecutive. If a finish time does not
follow a start time, the error
message displays

“

An invalid entry

was found in the data entered.
Please re-enter data.

”

Electric Rate Finish Time Editing

From the Edit (Summer, Winter,
or Yearly) Electric Rate Schedule
screen, press Edit next to the row to
change.

1. Press + or

−

to adjust the time.

2. Press Peak, Mid-Peak,

or Off-Peak to select the
electric rate.

3. Press the Back button to store

changes.

Only the finish time can be edited.
The start time is automatically
populated in the rate table.

Electric Rate Schedule Viewing

From the Select Electric Rate Plan
screen, press View (Summer,
Winter, or Yearly) Schedule.

Summary of Contents for Volt 2014


























































































































































































































































































































































































Search results

Summary of Contents for Volt 2014

Reviews:

Brands by name

Popular brands

HOLDEN Volt 2014, Owner'S Handbook Manual

Search results

Summary of Contents for Volt 2014

Reviews:

Brands by name

Popular brands