-5-
GENERAL INFORMATION
INDOOR FAN AUTOMATIC SPEED CONTROL
The airflow from the Indoor Unit can be controlled step by step, on the basis of the difference
between the room temperature and the set temperature. This allows to reduce the lapse of
time needed to reach the desired temperature both in Cooling and Heating mode, by treating
the appropriate air volumes.
MOTORIZED LOUVERS FOR AIRFLOW DIRECTION
The flaps can be controlled directly by the remote controller so as to reach your desired position.
• By pressing "DIRECTION/SWING" button, you can select your desired angle for vertical airflow
louver and make the flaps move up and down continuously, thus increasing air circulation inside
the room.
DIAGNOSTIC & PROTECTIVE FUNCTIONS
Shown by codifed flashing of LED indicators on the Indoor Unit, they allow to diagnose in a quite
procise way the main malfunctions which may concern the air conditioner.
3-minutes' delay protection: there is a protective control of the Outdoor Unit, to prevent
compressor's damages after stops. This control is effective in case of malfunction, power failure,
turning off the system, etc. and it does not allow Outdoor Unit to restart before 3 minutes have
elapsed since the Unit stopped. During this time, Indoor Unit cannot run.
AUTORESTART AFTER A POWER FAILURE
• When a power failure occurs during operation, the air conditioner immediately stops.
• When power is restored, “OPERATION” lamp starts blinking. In particular, the air conditioner
will automatically restart after 3 minutes have elapsed since power is restored. This means that
it is not required to press “ON/OFF” button on the remote controller. The settings will be the
same as before the blackout.
“AUTO CLEAN” FUNCTION
In COOL or DRY mode, press “AUTO CLEAN” button on remote controller to select self-clean
operation of air conditioner.
“CLEAN AIR” FUNCTION
Air quality is the key to comfort: this air conditioner is equipped with Ionizer device. Ionizer can
generate abundant anions to fill the room with refreshing and nature air. Your whole family will
enjoy a natural, pure and healthy air everyday.
“FOLLOW ME” FUNCTION
The remote control serves as a remote thermostat allowing for the precise temperature control
at its location.
“SLEEP” FUNCTION
This function allows to save electricity through the gradual increase (in Cooling mode) or the
gradual decrease (in Heating mode) of set temperature.
“TURBO” FUNCTION
This function enables the Unit to reach the preset temperature in the shortest time.
Summary of Contents for HCKI 275 XS
Page 41: ...NOTES ...
Page 42: ...NOTES ...
