manualshive.com logo in svg

Hokkaido HCKI 275 XS, User Manual, Page: 29 / 44

Share
Download
Hokkaido HCKI 275 XS User Manual Download Page 29

-29-

EMERGENCY OPERATION AND TEST SWITCH

NOTE:

 Do not use Emergency/Test function as the normal operating mode of the air conditioner.

Control panel

To reach the control panel, lift the front panel before.

 

Opening the front panel:
Pull up the front panel at both ends till a click
is heard and the panel remains fixed. Do not 
lift the panel any further because the hinges 
could get broken.

Closing the front panel:

Push down the front panel at both ends. Close
the panel firmly.

Operation in Emergency mode:
If you have lost the remote controller or its batteries are exhausted, the air conditioner can be started
by pressing the "AUTO/COOL" Manual control button on the frontal panel.
Press “Manual” button once: “OPERATION” lamp on Indoor Unit will light up, and the air conditioner
will work in forced AUTO mode.
The default setting temperature is 24°C. 

Testing the air conditioner:
If you press “Manual” button, operation mode is shifted in an order as: AUTO -- COOL -- OFF.
Operate Unit in forced COOL mode.
This is used for Testing purposes only.

•

•

End of operation in Emergency mode or Test mode:
Press once the "AUTO/COOL" Manual control button on the front panel while the air conditioner is
operating in Emergency mode or in Test mode: operation will be immediately stopped. Use the remote
controller to return to normal operation.

AUTO/COOL

Manual control button

Frontal panel

Summary of Contents for HCKI 275 XS













































Reviews:

No comments