Hokkaido HCKI 275 XS, User Manual, Page: 20 / 44

-20-
AUTO OPERATION
AUTO Mode
Connecting/operating the air conditioner
1.
Select "AUTO" mode by pressing “MODE” button.
2.
Select your desired temperature by pressing
“ADJUST” buttons.
3.
When AUTO mode is selected, the air conditioner
automatically chooses the suitable operation settings
according to room temperature and eventually to the
temperature set by the User.
The four possible options are among: “COOL”, “DRY”,
“HEAT”, “FAN”.
Connect the air conditioner to the power source:
“OPERATION” LED on Indoor Unit’s panel will start
flashing.
Press "ON/OFF" button to start the air conditioner:
“OPERATION” LED on Indoor Unit’s panel will
stop flashing and will light up.
Press "ON/OFF" button on remote control to stop the
air conditioner’s operation.
NOTES:
In "AUTO" mode, it is not possible to select your desired fan speed, as it will be automatically
controlled by the microcomputer (no fan speed indicator displays).
“AUTO” mode, as well as other operation modes, is memorized by the microcomputer, so if you
would like to keep it at nexr restart of the air conditioner, you only need to press “ON/OFF” button
on remote controller.
It is possible to change operation mode while the air conditioner is running in “AUTO” mode.
However, the Unit will not immediately start operating according to the new mode, but a little delay
is needed for carrying out a test and choosing new operating parameters.
1.
2.
3.
ADJUST
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MO
DIRECTION/
SWING
CLEAN
AIR
DE
FAN SPEED
TIMER ON
SLEEP
ON/OFF
TIMER OFF
AUTO
CLEAN
FOLLOW
ME
RESET LOCK
SET TEMPERATURE
LED
DISPLAY
TURBO
(°C)
1
3
2
Stop
~
~
~
~