38
5-12
5-11
5-13
1
W
O
3
1
D
2
Operation
5.6 Data detection mode
5.6.1 Manual Mode
5.6.1.1 Width Manual Entry
• Manual measurement with gauge for steel rims
(
Figure 5-11
) or data acquisition from the rim.
• From the control panel, select the width (
W
). The last
entered value is displayed.
• To edit the value, press keys
+ / -
(
1, 2, Figure 5-12
).
• Type in Enter by selecting key 3 (
Figure 5-12
).
5.6.1.2 Distance Manual Entry
• Correctly position measuring arm 1 (
Figure 5-13
) and
read the value from the scale on the measuring
armrod.
• From the control panel, select the distance (
O
).
The
last entered value is displayed.
• To edit the value, press keys
+ / -
(
1, 2, Figure 5-12
).
• Type in Enter by selecting key 3 (
Figure 5-12
).
5.6.1.3 Diameter Manual Entry
• Acquire rim nominal diameter by reading the value
on the rim or on the tyre.
• From the control panel, select the diameter (
D
). The
last entered value is displayed.
• To edit the value, press keys
+ / -
(
1, 2, Figure 5-12
).
• Type in Enter by selecting key 3 (
Figure 5-12
).
..
..
..
.
..
.