Instruction manual
No. 2117-6e
2.98
2.8
Semi-automatic re-marking
Set switch marked
to
Set "Semi-Man-Auto" switch to "Semi".
Drive off, and start the beginning of every line as per the old lines by using the
remote control. The lines will be finished automatically according to progrmmed
line length.
2.9
Manual setting of line begin and end
Setting of switch marked
has no effect.
Set "Semi-Man-Auto" switch to "Man".
Set "Start" switch to "Start".
Operate remote control as long as line marking is required.
2.10 Continuous line a fixed length
1. Possibility
For lines less than 100 m length, the required length can be preselected at the
selector switch
Set the cycle at a higher figure, preferably at 99.99.
Set switch marked
to
Set "Semi-Man-Auto" switch to "Semi".
Drive off, and at the required beginning of line, set "Start" switch respectively
operate remote control. The end of the line is determited automatically after
travelling the set length of line.
