HOFFEN VGS-7424, Instruction Manual

Page: 37 / 48

3
37
7.4 Attachment installation/removal
ATTENTION!
Do not install/remove the attachments when the device is hot, as
there is a risk of burns.
Installing the brush attachment
1. Make sure the device is disconnected from the power source.
2. Grab the steamer head and insert the attachment in accordance with the
reference drawing below.
3. To remove the attachment, pull it upwards.
Installing the pleat clip
1. Insert the pleat clip into the steamer head, making sure to align the head tab
with the indentation on the clip. When the attachment is installed correctly, it will
click into place.
2. To remove the pleat clip from the steamer head, firmly hold the steamer head
with one hand, then use your other hand to slide the clip down.