3
31
4. Wait until the steam iron reaches the desired temperature and the light indicator
goes off.
5. Press the SELF-CLEAN button for about 1 minute while holding the iron in a
horizontal position above a sink. Boiling water and steam together with rinsed
off impurities will be ejected from the openings in the ceramic soleplate.
6. Disconnect the steam iron from the mains.
7. Move the iron to (preferably) an old piece of fabric. This will guarantee that the
iron’s soleplate is dry during storage. It is recommended that the iron be stored
in an upright position.
ANTI-CALC system
A special resin filter installed in the water reservoir softens water and prevents scale
from accumulating in the soleplate. The resin filter is a durable device and does not
need to be replaced.
ATTENTION!
Do not use chemical additives, perfumes or decalcifiers. Failure to observe this rule
shall result in forfeiture of warranty rights.
The device does not contain any user-serviceable parts. Do not attempt to repair the
device on your own. Always have the device repaired by a professional.
If the power cord is damaged, it must be replaced by the manufacturer, a service
centre representative or a properly qualified individual.
9. REPAIR
• Wait until the iron cools down.
• Empty the water reservoir.
• Wrap the power cord around the iron bottom after the iron cools down
completely.
• Store the empty iron upright on a stable surface.
•
Always keep the device in a dry, well-ventilated location inaccessible to
children.
• Protect the device against vibration and shock during transport.
10. STORAGE AND TRANSPORT
