3
29
7.8 ANTI-DRIP function
The anti-drip system makes it possible to iron event the finest fabrics perfectly.
Always iron highly delicate fabrics with the control knob set to low temperature.
When the ceramic soleplate cools down to a certain temperature, drops
of boiling water may come out of the iron instead of steam and leave marks
or stains on the fabric. The Anti-drip function activates automatically when
the temperature is too low to prevent water dripping from the iron’s soleplate.
It will let you iron even the most delicate fabrics without risking damaging
or soiling them.
7.9 AUTO SHUT-OFF function
1. Upright position – if the iron remains switched on but not used for about 8
minutes, the incorporated automatic shut-off function will switch the iron off,
and the light indicator will start blinking.
2.
Horizontal position – if the iron remains switched on but not used for about 30
seconds, the incorporated automatic shut-off function will switch the iron off,
and the light indicator will start blinking.
To switch the iron on again, just move the appliance and start ironing. If you
have already finished ironing, unplug the iron immediately after you have
noticed activation of the AUTO SHUT-OFF system (the light indicator blinks).
7.10 AFTER IRONING
1. Place the iron upright.
2. Unplug the iron from the power supply socket.
3. Wait until it cools down.
4. Empty the water reservoir.
Attention!
Never wrap the power cord around the ceramic soleplate of the iron.
