[45]
EN
STEAM IRON
• It is recommended the selection of a lower temperature when use starch
on the fabrics and when iron without steam. The excessive heat burns the
starches and forms yellow stains.
• To avoid shinny patches on velvet fabrics, ironing them only in one
direction (the direction of fibre).
• Many fabrics become easier to ironing if they are not completely dry. For
example, the silk should be iron when still moist.
TROUBLESHOOTING
During use, if any irregularities are detected on the appliance’s operation, check
the below table to understand the causes and solutions. If it is not possible to
detect the cause, please contact the store where the appliance was bought.
Problem
Possible cause
Solution / Hint
The appliance is
turned on but does
not heats.
The temperature sele-
tor button (G) is set to
minimum.
Set the temperature
seletor button (G) to the
intended temperature.
Problems with the wall
socket.
Check if the wall
socket is damage and
connect the appliance
to a wall socket in good
conditions.
The appliance heats
too much.
The temperature seletor
button (G) was set to a
too high temperature for
the fabric to be ironed.
Set the temperature
seletor button (G) to a
lower temperature, more
suitable for the fabric to
be ironed.
