[47]
EN
STEAM IRON
Water droplets on
garments.
The steam function
is being used and the
appliance has not
reached the necessary
temperature.
Set the temperature
seletor button (G) to
the “MAX” position and
wait until the appliance
warms up.
Reduce the steam
output when ironing at a
low temperature.
The water inlet cover
(B) is not properly
closed.
Close the water inlet
cover
(B) properly.
Water loss while the
appliance is stored.
The water tank (K) was
not emptied after use.
After use, always empty
the water tank (K).
See the instructions
“Empting the water
tank”.
The ironed piece
of cloth turns dark
and/or sticks to the
soleplate (L).
The selected
temperature is too high
and is damaging the
piece of cloth.
Select a more suitable
temperature for the
fabric type and clean
the soleplate (L) with a
damp cloth.
CLEANING AND STORAGE
• Never immerse the appliance in water or any otherv liquid.
• Always unplug the appliance from the wall socket and allow it to cool
down completely before any cleaning operation.
• To clean the appliance’s surface, disconnect the plug, let it cool down
completely, empty the water tank (K) and set the steam control button (C)
to the
dry ironing
position.
• Clean the external surface with a soft, damp cloth, drying it then with a
dry, soft cloth.
• If you notice the presence of tissue residues on the base (L), clean it with
a damp cloth and vinegar
Note: never use metallic rough or pointed objects to remove any
deposit on the ceramic soleplate (L), never clean it using abrasive
products or with any other type of anti-scale agents.
• If the steam vents at the soleplate (L) are clogged by lime residues, you
can remove them with the help of a wood toothpick that will not damage
the soleplate surface.
