[43]
EN
STEAM IRON
appliance’s soleplate (L), never press the steam burst button (E) continuously
for more than 5 seconds and allows an interval of at least one minute before
pressing it again.
Vertical ironing
• The vertical steam output is particularly useful to iron hanging clothes,
curtains, suits, among others.
• Turn the temperature seletor button (G) to the “MAX” position.
• The temperature light (J) turns on indicating that the appliance is warming
up, and will turn off when the select temperature is reached.
• Hang the cloth on a hanger or place it on vertical support, approach the
appliance to the cloth and press the steam burst button (E).
• To achieve an optimum result wait about 5 seconds between each time
the steam burst button (E) is pressed. To avoid the any water leak from the
appliance’s soleplate (L), never press the steam button (E) continuously
for more than 5 seconds and allows an interval of at least one minute
before pressing it again.
Anti-drip system
• This appliance is equipped with an anti-drip system that immediately
stops the steam’s formation when the selected temperature is too low,
avoiding water spots on clothing.
Anti-scale system
• This appliance is equipped with a special system inside the water tank
that softens hard water and prevents lime scale build up resulting from
the high temperatures generated.
Note: the system is integrated and permanent and does not require
replacement. The existence of this anti-scale system does not avoid
completely the formation of the limestone on the appliance.
• The appliance must be cleaned regularly according to the hardness of the
water used and the frequency of use.
• Fill the water tank (K) and set the temperature selector (G) to the “Max”
position.
• Connect the appliance to the power supply and the pilot light (J) will
light on, check that the steam button (C) is in the
dry ironing
position (no
