x cm
Do not stand candles too close together. We recommend a distance
of at least 10cm between candles. Follow the manufacturer’s
instructions. Never put lit candles on top of each other.
Never blow out candles. Use a candle snuffer or extinguishing lid
to put out the candle.
Never use water or flammable liquids to put out the candle.
Always store candles in a cool, dry, dust free and, if possible, dark place. Make
sure that the candles can’t get bent. Do not pile them too high as the weight could
cause undesired pressure points. Always store candles separately by colour
to avoid undesired stains on the candles. Follow the candle manufacturer’s
instructions for correct storage of the candles.
Only use undamaged candles.
Never let the candle burn down completely. We recommend extinguishing the
candle when 2-3 cm remain.
2. Use
The SQUARE CANDLE is designed for candles with a circumference of 20–
24mm. The candle length can vary as you wish, but must not exceed 25cm. This
is essential for ensuring the candle holder stands safely.
Stand the candle in the centre of the hole provided for it. Make sure it is placed
securely and press the candle far enough onto the spike. Particular care must
be taken with stearin candles. Stearin candles have a tendency to break at the
bottom when put on the spike.
Only use high quality candles. Poor candle quality could lead to unwanted
leakage of wax from the candle.
3. Maintenance, cleaning and storage
You can remove any remnants of wax as follows:
• Remove big bits of wax by hand. Don’t use sharp objects as you might scratch
the surface.
• Put a piece of blotting paper in the oven, preferably on a piece of baking paper
to avoid making a mess of the oven.
• Put the candle holder in the oven over the blotting paper so that it catches the
melted wax. It is best to put a wooden skewer under the SQUARE CANDLE so
that the product is not in direct contact with the blotting paper.
• Heat the oven to 60°C.
• The wax begins to melt and is absorbed by the blotting paper.
• Let the SQUARE CANDLE cool sufficiently before taking it out of the oven.
The metal surface can be cleaned with warm water and a standard detergent.
Don’t use steel wool, wire brushes, scourers or other abrasive cleaners.
Always keep all parts in a safe, dry place.
Only use höfats spare parts when replacing faulty or broken parts. The guarantee
is no longer valid if replacement parts are used which are not höfats spare parts.
Summary of Contents for SQUARE CANDLE 00362
Page 3: ......
