4
Turnigy® V-Bar 600 Main Menu Configuration Steps
：
：
：
：
Main Menu Configuration Steps Without flight mode
：
：
：
：
Main Menu Configuration Steps Associated
With flight mode
：
：
：
：
GN-MODE displays current gain pulse width and flight mode:
The Turnigy® V-Bar 600 is capable of flying with four switchable flight modes which are pilot
selected from the transmitter. This is the same process as selecting the gain in your tail gyro but it can
configure all the flight characteristics on three axis’s. If you only plan on using one flight mode it is
advisable to leave the gain wire off of the installation and move on to setup.
9: TAIL GAIN MISC
2: TAIL BASE PARAM
12: PIRO OPTIMIZE
11: SWPL GAIN FEEDBK
4: SWPL MIXER RATE
7: SWPL SERVOS TRIM
10: TAIL TORQUR COMP
8: SENS DIRECT DEAD
6: SWPL HIGH POINT
5: SWPL LOW POINT
1: GN-MODE
3: SWPL-TYP SRV-DIR
2: TAIL BASE PARAM
4: SWPL MIXER RATE
7: SWPL SERVOS TRIM
8: SENS DIRECT DEAD
6: SWPL HIGH POINT
5: SWPL LOW POINT
3: SWPL-TYP SRV-DIR
9: TAIL GAIN MISC
11: SWPL GAIN FEEDBK
10: TAIL TORQUR COMP
13: READ DATA
12: PIRO OPTIMIZE