HobbyKing Turnigy V-Bar 600, Manual, Page: 11 / 19

11
in deadband zone.Increase RUD-DEAD.
SWPL-TYP SRV-DIR Submenu Configuration Steps:
1. GYRO-POS -----Turnigy® V-Bar 600 Placement Selection
Item Content
NORM
(Default)
Turnigy® V-Bar 600 runs parallel to the helicopter (nose) and can be placed at the
top and the bottom. It shall be powered on when changing the placement.
ROT-90
Turnigy® V-Bar 600 runs perpendicular to the helicopter (nose) and can be placed
at the top and the bottom. It shall be powered on when changing the placement.
2
、 、 、 、
SWPL-TYPE -----Swashplate Type Selection
Item Content
120DEG
(Default)
Transmitter should be in H1 model. Turnigy® V-Bar 600 controls 3 swashplate
servos after being mixed controlled by Turnigy® V-Bar 600 using 3-point (120°)
link method.
135DEG
Transmitter should be in H1 model. Turnigy® V-Bar 600 controls 3 swashplate
servos after being mixed controlled by Turnigy® V-Bar 600 using 3-point
(135°/140°) link method.