12
5.4 Programming timer (alternative to 5.3)
5.4.1 Adjusting the control mode
If you want to program the timer control, press
while
“TIME”
is flashing, then “
” (automatic) starts
flashing.
If you want to operate slot 2 (
) with programmed turn-on and turn-off times, press
when “
” flashes.
Continue making your settings with item 5.4.2 of these instructions.
If slot 2 (
) is to be operated via interval control, use the
▲
button to select
“Int“
(Interval) and confirm by pres-
sing the
button. Continue making your settings with item 5.4.3 of these instructions.
If slot 2 (
) is to remain permanently activated, use the
▲
to select
“ON“
and confirm by pressing the
button.
If you want to finish programming, press and hold
for 3 seconds until the display returns to operating mode.
