10
5.2.3 Deactivation/Activation of the audible temperature 1 alarm
When
“OFF“
is flashing, use the
▲
and
▼
buttons to activate the alarm with
“ON”
or to deactivate it by selecting
“OFF”
. Press
. when
“TEMP 2“
is flashing.
5.3 Programming of temperature 2 for slot 2
5.3.1 Choice of HEAT /COOL
To set the temperature 2 regulation, press
.
(To set the timer control (alternative to temperature control), press
▼
until
TIME
flashes, then press
and continue with item 5.4 of these instructions)
Flashing “
“.
Confirm with
to select HEAT (
) operating mode (control of connected Heaters) or use
▲
and
▼
to select
COOL (
) (control of connected Cooling devices).
5.3.2 Adjusting the temperature 2
When
“P01“
is flashing, press
to program position 1.
(P01 to P08 can be selected using
▲
and
▼
)
When
“CHA”
is flashing, the
▲
and
▼
buttons can be used to select ‘CHA’ (change) or ‘dEL’ (delete).
If
“CHA”
is selected, press
to confirm, the hours
“00”
will flash”.
Use the
▲
and
▼
buttons to set the hours between 0 and 23.
Press the
button, the minutes digits
“00”
will flash.
Use the
▲
and
▼
buttons to set the minutes between 0 and 59.
Press the
button, the desired temperature value will flash -
“25.0”
.
Use the
▲
and
▼
buttons to set the desired temperature value between 0 and 60.
If
“P02”
flashes, you can program further time periods in the same manner.
If you do not wish to set further time periods, press and hold the
button for a few seconds.
Note: It is not possible to enter turn-off times. The start time of, for example, P02 is the end time of P01. If only P01
