8
g
g
5. Programming instructions
To activate program mode, press the
button.
The
▲
and
▼
buttons are used to switch between the various programming main levels: Clock –Temperature 1 –
Temperature 2 – Timer.
To exit program mode from main level, press and hold the
button for 3 seconds or do not press any buttons for
90 seconds. To switch from sub to main level as well hold the
button for 3 seconds.
5.1 Programming the clock
5.1.1 Adjusting the time
j
g
The clock symbol flashes when program mode is active.
Press the
button, the hours will flash –
“12”
.
Use the
▲
and
▼
buttons to set the hours between 0 and 23.
Press the
button, the minutes digits
“00”
will flash.
Use the
▲
and
▼
buttons to set the minutes between 0 and 59.
Press the
button, the seconds will flash -
“00”
.
Use the
▲
and
▼
buttons to set the seconds between 0 and 59.
Note: Once the clock has been set at least once, you can use
▲
or
▼
to directly access the settings
“TEMP1”
,
“TEMP2”
or
“TIME”
.
Attention: The Biotherm pro system does not automatically switch between summer time and winter time. This chan-
ge must be entered manually.
