Version date: February 13
th
, 2017
Troubleshooting 41
7
User instructions
HOAF thermHIT® 75M/100M/125M
Chapter 7 - Troubleshooting
3. I can hear the spark
plug sparking, but the
burner is not igniting.
1.
Check that the gas valve is open.
2.
Check that the bottle is empty.
3.
Check the distance between the tip of the spark
plug and the outer wall of the burner opening -
this should be approximately 3-4 mm.
Note! Close the gas valve and turn the key
switch to '0' before you check this distance.
4.
Close the gas valve and check that there is no
dirt under the
HOAF thermHIT® 75M/100M/
125M
at the burners. Make sure the nozzles are
"open".
5.
Check that the
HOAF thermHIT® 75M/100M/
125M
is in the lowest (horizontal) position. In
this position, the ignition operates in the best
possible way.
6.
If no solution can be found, please contact the
dealer.
4. The
HOAF
thermHIT® 75M/
100M/125M
is
ignited, but the
burners do not run
over.
1.
Close the gas valve and check that there is no
dirt under the
HOAF thermHIT® 75M/100M/
125M
at the burners. Make sure the nozzles are
"open".
2.
If no solution can be found, please contact the
dealer.
Problem
Action