manualshive.com logo in svg

HOAF thermHIT 75M, User Instructions, Page: 17 / 66

Share
Download
HOAF thermHIT 75M User Instructions Download Page 17

Version date: February 13

th

, 2017

Safety  17

2

User instructions

HOAF thermHIT® 75M/100M/125M

Chapter 2 - Safety

• A fire extinguisher that has been used, must be replaced immediately.

•

Safety measures may never be switched off.

•

If, during use of the 

HOAF thermHIT® 75M/100M/125M

, a part gets 

damaged, immediately shut off the gas bottle. Any damaged part must be 

replaced before further use.

•

Maintenance on the 

HOAF thermHIT® 75M/100M/125M

 must be carried out 

be trained fitters.

•

Make sure to shut off the gas bottle before carrying out any maintenance 

work.

•

It is not permitted to make any modifications to 

HOAF thermHIT® 75M/100M/

125M

 without prior written permission by the manufacturer.

•

The connection to the gas bottle must be checked every day that you use the 

HOAF thermHIT® 75M/100M/125M

.   

•

The gas pipes and connections have to be checked for leakages every year. 

2.5.3  Safety in case of a burner with propane bottles

Propane is a pure and environmentally friendly fuel. The 

HOAF thermHIT® 75M/

100M/125M

 will almost completely burn it up into carbon dioxide and water. If 

the 

HOAF thermHIT® 75M/100M/125M

 is operated correctly, use of the  

HOAF 

thermHIT® 75M/100M/125M

 is completely safe. However, always take the 

following precautions:

•

Propane becomes explosive when mixed with air. Therefore, 

HOAF thermHIT® 

75M/100M/125M

 must be treated with great care. Should you observe any 

damage to the gas supply, immediately switch off the 

HOAF thermHIT® 75M/

100M/125M

. Do not start using the 

HOAF thermHIT® 75M/100M/125M

 until 

all damage has been repaired by professionals.

•

Propane is heavier than air and will therefore accumulate in lower situated 

cavities or basements. Therefore, do not store 

HOAF thermHIT® 75M/100M/

125M

 over channel shafts, etc. Always store the 

HOAF thermHIT® 75M/

100M/125M

 in a well-ventilated room and never in a basement. 

•

Carefully observe the instructions of your gas supplier concerning storage, 

transport and the filling of propane bottles.

•

Only fill the propane bottles in the open air, using equipment provided by your 

gas supplier. It is absolutely forbidden to smoke or have open fire nearby 

during filling.

•

Fill the propane bottles up to a maximum of 80%.

•

Always keep the fire extinguisher at hand.

2.6 Safety devices

The 

HOAF thermHIT® 75M/100M/125M

 is equipped with the following safety 

devices:

Summary of Contents for thermHIT 75M



































































Reviews:

No comments