Version date: February 13
th
, 2017
Operation 35
5
User instructions
HOAF thermHIT® 75M/100M/125M
Chapter 5 - Operation
5.7 Charging the battery
A battery is present in the device that provides the required voltage for the
ignition, and opening of the gas valve of the
HOAF thermHIT® 75M/100M/125M
.
The capacity is chosen so that it can provide the device with the required voltage
for 1 day. After each working day, the battery needs to be recharged so that the
HOAF thermHIT® 75M/100M/125M
can be used immediately and without any
problems the next day.
If the battery is empty, the burners will not ignite. However, failure to ignite the
burners can have several causes:
•
The gas bottle is empty.
•
The gas valves are not open.
•
The burners are clogged with dirt.
•
The spark plug is damaged or bent.
Check the above points if you have recharged the battery and it still not ignites.
Position
the battery charger in the control panel.
The control panel is provided on the side with a
connector plug in which a battery charger can
be connected. A separate appropriate battery
charger is included for this purpose.
Although the HOAF thermHIT® 75M/100M/
125M is supplied with a charged battery, the
battery may have run out by the storage period.
We therefore recommend to always charge the
battery before first use.
When charging the battery, only use a charger
supplied or approved by HOAF Infrared
Technology !
Fig. 5-8: Charging the battery