manualshive.com logo in svg

HOAF thermHIT 75M, User Instructions, Page: 21 / 66

Share
Download
HOAF thermHIT 75M User Instructions Download Page 21

Version date: February 13

th

, 2017

Installation  21

3

User instructions

HOAF thermHIT® 75M/100M/125M

Chapter 3 - Installation

Do not over tighten! This may damage the 

connection.

Do not connect a gas bottle if the necessary 

sealing ring is missing.

5. Check

 the coupling for leakage Method:

•

Turn

 the gas valve to open it and put the hose under pressure.

•

Close

 the gas valve of the gas bottle.

•

Spray

 leak-detection spray onto the connection.

•

Observe

 to see whether any gas bubbles are forming. 

•

Repeat

 this procedure each time you connect a gas bottle to the 

HOAF 

thermHIT® 100M

.

• If no gas bubbles form, the connection is correctly installed.

The 

HOAF thermHIT® 100M

 is now ready for use.

The HOAF thermHIT® 75M/100M/125M is 

solely intended for use with propane in liquid 

phase (liquid intake). Do not use gas bottles for 

gas supply (gas intake)!

Never use the  HOAF thermHIT® 75M/100M/

125M with butane gas!

Keep gas bottles away from the hot gases that 

are spread by the burners.

Let your gas supplier advise you about the use 

and storage of gas bottles.

Summary of Contents for thermHIT 75M



































































Reviews:

No comments