Version date: February 13
th
, 2017
Operation 33
5
User instructions
HOAF thermHIT® 75M/100M/125M
Chapter 5 - Operation
5.4 Driving
After ignition, start driving immediately, in order
to avoid fire and damage to the soil.
The burner hood of the
HOAF thermHIT® 75M/100M/125M
must be moved along
the ground during use. There has to be a distance of approximately 2 cm between
the ground and sliding carriages of the
HOAF thermHIT® 75M/100M/125M
. The
sliding carriages are there to protect the burner hood from minor unevenness on
the ground.
In order to prevent heat loss, the
HOAF thermHIT® 75M/100M/125M
must be
moved along close to the ground. Drive slowly. The final result depends on:
•
Distance of the burners to the vegetation
•
Speed
•
Type of vegetation
•
Density of the vegetation
•
Weather conditions during and after the treatment
•
Humidity
•
Etc.
5.5 Stopping
1. Turn
the key switch to '0'.
2. Let
the residual gas burn.
The burner is faltering.
3. Stop
the tool carrier.
Never leave the machine unattended.
Fig. 5-5: Stopping