119
Maintenance
6.7.2. Checking the brake pads
The brake pads must be replaced when they
•
are only 2.5 mm thick (height of carrier plate and friction lining)
•
come into contact with oil (leads to low braking power)
To check the brake pad thickness, use the yellow transport lock supplied:
•
Pull the brake lever and insert the rear side of
the transport lock between the carrier plates
of the corresponding brake calliper. If the
transport lock still fits between the pads, they
are not worn out.
•
Alternatively, you can put the removed pads
into the small notch in the transport lock.
The pads are worn out when they fit into
the notch.
6.7.3. Checking the brake discs
The brake discs must be replaced if they have a thickness of less than 1.8 mm.
The thickness can be determined using a calliper, for example.
6.8.
Adjusting the headlight range
The headlight should be set so that it does not dazzle other road users.
We recommend checking the glare with a second person while riding in the dark.
To adjust the tilt of the headlight, use a suitable
Allen key to unscrew the light bracket and set
a new angle. Then tighten the screw only so far,
allowing you to still correct the tilt of the light by
hand with greater force.
Summary of Contents for XD2 Urban Rohloff Pedelec
