27
M0410
STEP 3. Computer post
Firstly please remove the 4 pcs of M8*20 screws (44),
M8 spring washers (50), M8 arch washers (48) which
were pre-assembled on the computer post. Pic 3-A
Then Move the computer pole set(2) to the lower computer
pole of the main body(1),connect the sensor wire upper (55)
and sensor wire lower(56),cover the computer pole (2) to the
lower computer pole. Finally, use the removed 4 pcs of M8*20
screws (44), M8 spring washers (50), M8 arch washers (48) to
lock them up.
STEP 4. Handle bar
Move the handle bar tube (3) to the computer
Pole (2),insert the handle pulse wire (60) to
the hole of the head of computer pole(marked
by red circle)and make it out of the computer
fixed piece.
Use the head of the computer pole(2) to block
the handle bar tube(3),cover it with handle bar
housing(35),use handle bar knob(34) to transfer
handle bar knob bushing(65),M8 spring
washer(50) and flat washer D12*ID8.5*1.5T(64),
then make the handle bar tube (3) and handle
housing(35) fixed onto the computer pole(2)
and fasten them.
Pic.4
Pic.3-A
Pic.3
44
50
48
2
44
48
50
56
55
1
3
2
34
35
50
64 65
60
Summary of Contents for M0410
Page 48: ...48 M0410...
