5 (30)
2
Safety Instructions
2.1
Information on EMC
Risk of interference to radio and television if used in office or home environment! The
product is a class A device.
Use exclusively included accessories or HMS accessories that are intended for use with
the device. Use exclusively shielded cables.
Make sure that the shield of the interface is connected with the device plug and the plug
on the other side.
2.2
General Safety Instructions
►
Protect product from moisture and humidity.
►
Protect product from too high or too low temperature (see
).
►
Protect product from fire.
►
Do not paint the product.
►
Do not modify or disassemble the product. Service must be carried out by HMS Industrial
Networks.
►
Store products in dry and dust-free place.
2.3
Intended Use
The devices are intended for installation on standard DIN rail or for use with adhesive feet on an
even surface.
2.3.1
CANnector Device Variants S, L, SE, LE, LA
This manual describes the external interfaces of the device, their functionality and pin allocation.
The device does not contain any application beside the operating system. Adding functionality to
the device is provided by the Advanced Configuration Tool (ACT) or the Software Development
Kit. For further information refer to the corresponding manuals or online help. The device is
intended to be used in the office, stationary applications, test benches or test vehicles.
2.3.2
CANnector Log, Range, Bridge
Each product variant is ready-to-use due to the pre-configured basic configuration which is
already loaded on the device. CANnector Log is used to log CAN, CAN FD, and LIN communication.
CANnector Bridge is used to connect computer systems to CAN and CAN FD networks, to connect
the networks with each other, and to change or manipulate the network data. CANnector Range
is used to forward CAN, CAN FD, and LIN networks through Ethernet networks and to connect
the networks to computer systems over a long distance.
CANnector Installation Guide
4.01.0091.20000 1.3 en-US
