28
BE5000-i
Customized program setting
The users can set the speed, time and save them in the computer for future use, according to their own needs. There
are 5 sets of user settings and 16 programs per set in this computer.
Customized program setting:
Press “MODE” button in ready status until custom program setting window show program
1,Time, Speed and Incline windows flash, press
SPEED/INCLINE -/+
to choose programs; and the window will show the
corresponding No… press “ENTER” to start program setting. If the program is set, window will show the corresponding
data, then press START to enter into the running state.
Time setting
Before this section of program is set, the initial time is 16 minutes. Otherwise it shows set time. Press
SPEED/INCLINE
-/+
to change program running time (The scale is 10-59 minutes.), press ENTER to start speed and incline setting of
section.
Speed and incline setting
a.
The dot matrix of section 1 in the LED starts to twinkle, meaning it’s OK to start setting. If this program is
unidentified, the initial speed is 1KM/H; the initial incline is 0. Otherwise it shows set speed and incline.
b.
Press “speed+ “, “speed-“to choose the speed you want.
c.
Press “ “, “incline-“to choose the incline you want.
d.
Press ENTER after setting, and start next section speed and incline setting.
e.
Do the same to set the speed and incline of section 2-16. When the last section is finished identified and you
continued setting by pressing ENTER, the computer will beep twice to remind you the setting is done.
f.
During setting, press STOP to exit.
g.
Press “MODE” to save the data to the computer. The dot matrix shows all speed data; time window shows total
time; incline window shows section one incline data.
h.
If you want to delete all customized program setting data, press “Program” when under the process of setting.
i.
If all data are saved, TIME/SPEED/INCLINE/CUSTOM window flash, press START to operate these set programs.
HRC program operation
4 Modes:
HRC1 : HRC limit is 65% of max pulse,
HRC2 : HRC limit is 75% of max pulse,
HRC3 : HRC limit is 90% of max pulse,
HRC4 : IND for individual, which you can select your heart rate limits by yourself(50~220BPM)
Max heart rate (MHR) =’220-age’. (This function is suggested to be used with Chest Belt)
a.
Come to HRC mode input:
In ready status, press MODE until ‘HRC’ will flash on the screen,
Press “ENTER” to confirm and enter the Age setting.
b.
Age (range 20~80, preset value is 30):
Age window displays “30” or last preset value,
Press SPEED/INCLINE -/+ to adjust the age value,
at the same time, the Pulse window will show the corresponding calculated heart rate value, Press “ENTER” to
confirm and enter the Time setting.
c.
Time(range 10~99):
Time window shows 0 (zero) or last preset value, if you want to set the time, then Press SPEED/INCLINE -/+ to
adjust the time value, Press “ENTER” to confirm and enter the HRC setting; If you don’t need set, press ENTER
directly to enter HRC control mode setting.
Summary of Contents for BE5000-i
Page 4: ...4 BE5000 i Diagram zbiorczy...
Page 22: ...22 BE5000 i Hardware and tool...
Page 23: ...23 BE5000 i Explored drawing...
Page 41: ...41 BE5000 i N kres...