5.5. Configuration with AT Commands
Advanced configuration can be carried out by issuing AT commands via the web interface
or over a Telnet or RAW TCP connection to port 8080 or over serial interface.
Use AT commands to setting advanced parameters, that are not accessible in the Bolt
Serial built-in web interface.
AT commands can be used to read out parameters in text format and for batch
configuration using command scripts.
For a complete list of supported AT commands, click Help in the built-in web interface. See
also the AT Commands Reference Guide at
Procedure
Figure 5. AT Commands and AT Results
1.
Enter or paste the AT commands into the Enter AT Command(s) text field.
2.
Click Send.
3.
The result codes are displayed in the AT Result panel.
Configuration with AT Commands
Anybus
®
Wireless Bolt Serial
™
SP2554 2.0
Page 17 of 28
