5.6. Set Up Wireless Infrastructure
Connect two or more Bolt Serial units via WLAN or Bluetooth using Easy Config.
Procedure
Connecting the Devices
Figure 6. Serial bridge
1.
Connect Client 1 to a Slave serial device. See also
Connect to LAN, Serial and Power
2.
Connect Access Point 2 to the Master device.
3.
Connect Access Point 2 to your PC, with an Ethernet cable.
4.
Connect Access Point 2 to power.
Activate Easy Config
1.
Navigate to the web interface of Access Point 2.
The default address to Access Point unit 2 is 192.168.0.99.
Anybus
®
Wireless Bolt Serial
™
Set Up Wireless Infrastructure
Page 18 of 28
SP2554 2.0
