HMS Anybus HMS-EN2MB-R, User Manual, Page: 42 / 72

Appendix D: Modbus-TCP Client Configuration Manager 40 (70)
D.1 Home
The introductory window of the configuration and status pages presents important error tracking
information, as well as general information and statistics.
1
3
2
D.1.1 Operation Mode
The table below shows the correlation between the operation modes of the Modbus-TCP
network and the EtherNet/IP network.
EtherNet/IP (Network 1)
I/O data exchanged No I/O data exchanged
Modbus-TCP
(Network 2) Run Data is exchanged between the two
networks.
The EtherNet/IP network exchanges
no data. Data to the Modbus-TCP
network is in clear, freeze, safe value
or stop state.
Idle The Modbus-TCP network exchanges
no data. Data to the EtherNet/IP
network is in clear or freeze state. No data is exchanged. Both
networks, independently, are in
clear, freeze, safe value or stop state.
In case of an error on the EtherNet/IP network, the following additional statuses may appear:
EtherNet/IP (Network
1)
Description
Error
Class 1 connection error.
Duplicate IP address detected.
Shutdown Unexpected error (the linking device needs a restart).
D.2 Configuration
D.2.1 Authentication
Select Authentication in the left-hand menu in the configuration manager.
Linking Device User Manual
scm-1202–181 2.0 en-US