HMS Anybus HMS-EN2MB-R, User Manual, Page: 22 / 72

Configuration 20 (70)
10. Perform the following steps to add and configure a new transaction:
a. Click Add new transaction and select Edit .
b. Add a name of the transaction in the Name field in General transaction settings .
“MyTrans1” is used in this example.
c. Select the Modbus command function that should be executed. This example uses
function code 23 (Read/Write multiple registers).
d. Define the number of elements to be sent and received in the Elements field in both
the Read settings and Write settings sections.
This example defines 120 elements (240 bytes) in each direction.
e. Click OK to save the new transaction.
Linking Device User Manual
scm-1202–181 2.0 en-US