Drawing 14 Drawing 15
Drawing 16 Drawing 17
4-2 Program mode
Press RESET key to go to main menu. Press “+” or “-” key and press MODE to enter PROGRAM
mode. Entering Program mode, there are total 12 program profiles (P1~P12) (
Drawing 18~29
)
for selection. Press “+” or “-” key button to select one profile you prefer and press MODE to
confirm. Before exercising, user need to adjust following value:
TIME : is blinking (
Drawing 30
). User may press “+” or “-” key to set up target training time from 00:00 to
99:00 (
Drawing 31
).
DISTANCE: is blinking. User may press “+” or “-” button to set up target distance from 0.0~99.0.
Press MODE to confirm setting.
CALORIES : is blinking . User may press “+” or “-” button to set up target calories from 0~990,
the increment/decrement is 10. Press MODE to confirm setting.
PULSE : is blinking. User may press “+” or “-” button to set up target pulse from 0-30~230.
Press MODE to confirm setting.
Press START/STOP button to start training.
During training mode, user can also adjust resistance level by pressing “+” or “-” button. When
adjusting resistance level, LED big window will show LEVEL value for 2s then display PULSE
value.
Once the preset target data counting down to 0, the monitor will stop automatically.
User may also press START/STOP button to stop training. Press RESET reverse to main menu.
53
Summary of Contents for H5815
