HMS Premium H5815, Instruction Manual

Page: 45 / 126

Step 4:
28
72
8
10
72
45
68
62
9
11
27
4
6
81
81
Step 5:
5
8
9
85
70
57
10. Install the Roll wheel position stopper(85)
on Pedal group-left(8) with an Allen Pan
head half thread bolt(70) and an Hex self-
locking nut (57)
11. Assemble the right side same as above
steps.
12. Add some oil on the sliding rail.
1. Add some oil to the axle of the main frame. Place the pedal group left (8) on the track, secure the
pedal group left (8) by 1pc flat washer (45), 1pc crank axle screw cover(30) and 1pc allen pan
head full thread bolt (68) on the axle.
2. Apply some of the grease to the axle of the Allen C.K.S. hollow screw (72). Connect left pedal
connection leg (10) with bottom wing arm (6), secure with 1pc allen C.K.S. hollow screw (72).
3. Attached left bottom swing arm cover(27) and right bottom swing arm cover(28) on the left swing
arm (6), secure with 2pcs philips C.K.S. self-tapping screw (62).
4. Assemble the right side same as above steps.
45