HME IQBASE-N, User Manual

Page: 10 / 13

Setting the Base ID

At the “SET Base ID” menu, “SYSTEM BASE ID:” is displayed.

Input the Base Id and then press “ENTER” key.
11) GROUP CALL ID
With this feature, you can setup the GROUP CALL ID.
Setting the Group Call ID
 At the “GROUP CALL ID” menu, “GROUP CALL ID(1-2):” is displayed and you
can select among 1-2.

If you want to input Group ID #1, press “1+ENTER” and then “Set Group ID
#1” is displayed.

Input Group Call ID #1 and then press “ENTER” key.
 Group ID #2 can be set as same way as Group ID #2.
12) OUT OF RANGE ID
With this feature, you can setup Out of Range ID.
Setting Out of Range ID

At the “OUT OF RANGE ID” menu, “Set Out of Range ID:” is displayed.

Input out of range ID and then press “ENTER” key.
13) SET BAUD RATE
With this feature, you can setup the baud rate you want.
Setting Baud Rate

At the “SET BAUD RATE” menu, you can select the baud rage using “#” key.
Baud Rate List
(1) 512 BPS
(2) 1200 BPS
14) SET FREQUENCY
With this feature, you can select the frequency you want.