Be sure that all pagers are returned before performing this procedure.
To change the alert mode of your pagers follow these instructions
Remove all the pagers from the charger base or unplug the power supply
that is connected to the charger bases.
At the “Set Pager Alert” menu, press the “#” key to scroll through the
different alert options.
After making a selection, press the “ENTER” key 3 times. After sending the
code, the pagers will now respond with your new selection.
Press “CANCEL” key to exit the system programming menu.
Return all the pagers to the charger base or plug the power supply. The
pagers are ready to receive the page with the new alert.
6) Duty Alert (Factory Default: OFF)
This feature enables your transmitter to send a page, at a preset time, to a certain
pager to remind them of a duty required of them. For example, a buzzer can receive
a page every 60 minutes to remind him to check the restrooms.
You can assign up to 3 different pagers to be duty alert pagers.
Programming the duty alert
At the “Duty Alert” menu, “Duty Pager(1-3) is displayed and you can select
Duty Pager # among up to 3.
Select Duty Pager # using “#” key and press “ENTER” key.
If you choose Duty Pager #1, then “Duty Pager #1: OFF” is displayed.
You can select ON/OFF using “#” key and then press “ENTER” key.
You can setup Duty Pager #2 and #3 as same way as Duty Pager #1
7) Out of Range (Factory Default: OFF)
With this feature, the pager will play a melody when taken out of range of the
transmitter to inform the guest that they are out of range and will miss their page.
The melody will only stop when they return back within range.
Setting up the Out of Range “ON”
At the “Out of Range” menu, “OUT OF RANGE:” is displayed and you can
select ON/OFF using “#” key.
