13
4.6 DIL switch functions
DIL-switch
Functionality
1
Adjusts in combination with DIL 7 and 8 the
functionality of the release
locking function
DIL 7
DIL 8
DIL 1 = ON
DIL 1 = OFF
OFF
OFF
Function
doesn´t lock
Function
is locked after
0,5 sec permanently
OFF
ON
Function
is locked after
1,0 sec for 5 Minutes
Function
is locked after
1,0 sec permanently
ON
OFF
Function
is locked after
2,0 sec for 5 Minutes
Function
is locked after
2,0 sec permanently
ON
ON
Function
is locked after
3,0 sec for 5 Minutes
Function
is locked after
3,0 sec permanently
The release locking function can be reset by pressing the
Lösen
button
shortly (shorter than the selected locking time).
2
ON: fixed accelerator mode
If you press the
Gas+
button on the hand-held transmitter for at least
2 sec. the
Gas+
function is latched. This mode is selected if you use a
solenoid or air cylinder to set a fixed accelerator position. The function
can be reset by pressing the
Gas+
button shorter than 2 seconds.
OFF: linear accelerator mode
In this mode you can continuously adjust the engine speed with an
actuator. The adjustment is done by the
Gas+
and
Gas-
buttons.
3
ON: Automatic alarm function enabled
Functionality described in section 4.1.4.
OFF: Automatic alarm function disabled
4
ON:
Pressing the
Ziehen
button
automatically
activates the pull- and
release-function
OFF:
Pressing the
Ziehen
button
only activates the pull-function
5
ON: R3 is activated
if you either press the
Ziehen
or
Lösen
button
(Follow-up mode).
You select this mode for example if you have to
drive an external hydraulic pump whenever the hydraulic system
needs pressure.
OFF: R3 is activated
by pressing the
Ziehen
button
(Movement-mode).
You select this mode for example to drive a warning light whenever
the winch is pulling.
6
ON:
Pressing the
K.Lösen
button activates the release function only as
long as you press the button.
OFF:
Pressing the
K.Lösen
button pulses the release function in adjustable
intervals
7 - 8
See settings of DIL 1 for details
Summary of Contents for HM 2225
Page 17: ...17 9 View on the pc board of the receiver ...
Page 18: ...18 10 Block diagram of the receiver ...
Page 20: ...20 ...
