18
MM06UE01-2002
ATTENTION!
Danger of EMC interference in the encoder signal!
Approved ESD precautions must be followed at all times during readhead and interface electrical
connections.
Make sure that the encoder cable has been shielded correctly!
Ensure that the shielding is in full contact across the connectors!
Ensure that the pairs of wires with the sin/cos signal are shielded separately!
The linear positioning measurement system is installed ready for operation in the linear motor system.
Observe the Technical Information and Approval Drawing for pin assignment!
5.3.3 Connecting the limit switch
The optical or inductive proximity switches in design as limit switches are installed ready for operation in the linear
motor system.
Observe the Technical Information and Approval Drawing for the position of limit switches.
Observe the Technical Information and Approval Drawing for pin assignment!
